HSC Industrial Technology (Multimedia) Industry Study Example - ABC

It feels like it was a lifetime ago that I finished my HSC, but I've noticed an overwhelming trend in my website's analytics: most people arriving at my website from Google have been searching for things like "IT Multimedia industry study example". How about that! My industry studies from back then are buried deep in my website, so I wanted to post them here to make them more accessible.

Keep in mind that these are old, but I recall one of them was marked 100%, and the other ... I don't recall. But please just consider it more a kick start to get ideas / etc.

Anyway, here they are; hope they help someone! :

Year 11 IT Multimedia Industry Study:

Year 12 IT Multimedia Industry Study:

Comments

Post a Comment

Popular posts from this blog

Akai EWI3020m Disassembly & PCB Pictures

Image
The EWI3020m's "non-volatile" memory battery is soldered directly to the main PCB, which means you have to take the whole PCB out in order to desolder and replace it. I took my newly acquired EWI3020m apart a few days ago to replace the hardwired battery with a coin-cell battery holder. Every one of the boards are single-sided Phenolic Paper PCBs populated solely with through-hole components and even jumper wires. You can see in the pictures that even some of the ICs (the CEM3374 VCO and EPROM for example) are socketed! Certainly makes repairs a happier experience. Here are a few pictures of the disassembly and the main PCB itself; apologies for not having a suitable scanner! Main PCB Images EWI3020m Main PCB EWI3020m Main PCB (traces) Composited view of the component-side and trace side Re-Assembled with Battery Holder Installed Coloured wires are the "instrument in" cable "Instrument In" connection to t...
Read more

Sony PVM 1454QM Disassembly

Image
Just popped the cover off my Sony PVM 1454QM RGB video monitor. Have had it for a few years, and it's always worked perfectly well - just took it apart for a second time to check more carefully for any obviously bulgy caps. It seems that these monitors (or at least their picture tubes) were manufactured in Ichinomiya in Aichi Prefecture, Japan . Apparently mine was manufactured in 1996. Mine had a few defects when I got it (missing Sony logo, kind of grubby, dumb calibration settings, base has been hacked apart for some reason - perhaps to fit into some rack mount?), but was overall a pretty good deal at $50, free delivery! Back of the Power Supply PCB The Picture Tube in the Sony PVM 1454QM Flyback Transformer in the PVM 1454QM Deflection Yoke in the PVM 1454QM Anode Cap So all in all, it's a little dusty - but I really love the no-expense-spared modular design! Not entirely sure what's the deal with the paper phenolic board though (FR4 was o...
Read more